Product name

　　Volkswagen Santana 3000ABS training platform

　　(Santana, Santana 3000, Jetta)

　　Feature

　　1. The Santana 3000ABS system is mainly supported by brackets, which are made of national standard square tubes, angle steel, etc., with reliable support, and are equipped with shock absorption elements; the surface is sprayed with plastic to prevent corrosion and aging, and does not fade. The bracket is supported by universal self-locking casters and has a self-locking device, which is convenient for mobile teaching.

　　2. The lower part of the training platform is equipped with a three-phase synchronous motor to drive the brake disc to simulate the operating conditions of the vehicle, and the motor speed is driven and controlled by the inverter. Also equipped with vacuum booster pump, brake master cylinder, brake pedal, etc.

　　3. The detection panel has a complete color circuit diagram and two-way test port, without pulling the electrical plug or puncturing the wire, it can carry out all application techniques including resistance, voltage, frequency, pulse width, duty cycle, oscilloscope and continuity testing. Practical teaching and practical training functions.

　　4. The control panel is mainly used to control the simulated vehicle speed. The pointer pressure gauge on the control panel displays the working oil pressure of each wheel of the ABS.

　　5. When the ABS system is working, the wheel brakes keep slightly rotating the pressure gauge pointer of each wheel and keep swinging to show that the system is constantly applying and releasing pressure when the ABS is working.

　　Specification (Technical parameter)

　　Volume: 1200MMX1100MMX1750MM

　　Weight: 450KG

　　Power supply: 12V 65AH, 380V)

　　Training contents

　　1. Objectives of the Training Department

　　1. Master the working principle of anti-lock braking system

　　2. Understand the disassembly and maintenance of ABS;

　　3. Detect and eliminate system faults;

　　The content of the experiment.

　　1. The working principle of ABS;

　　2. Characteristics of ABS;

　　3. ABS disassembly and maintenance;

　　4. ABS parts installation position.

　　5. Inspection, maintenance and replacement of ABS components.

　　6. Dynamic data reading and detection